Velocity Edge GX440 Guide de l'utilisateur télécharger pdf (Page 365)

Rev 1 Oct.13 365

S83 Query or set the UDP auto answer idle time-out. If no data is sent or received before the

time-out occurs, the current UDP session is terminated. While a session is active, packets

from other IP addresses are discarded (unless *UALL is set).

ATS83? to query

ATS83=n to set

• n=0 — No idle time-out (Default)

• n=1 – 255 — Time-out in seconds

TCPS Query or set the TCP connection time-out (TCPS) units. If there is no traffic through the

TCP connection for the specified interval, the connection is terminated.

AT*TCPS? to query

AT*TCPS=n to set

• n=0 — minutes

• n=1—seconds

TCPT Query or set the interval to terminate a TCP connection when there s no traffic. This value

affects only the TCP connection in TCP PAD mode.

AT*TCPT? to query

AT*TCPT=n to set

• n=0–255

*UALL Query or set the ability to accept UDP packets from any IP address when a UDP session is

active. If there is no UDP session active, an incoming UDP packet will be treated according

to the UDP auto answer and AIP settings.

AT*UALL? to query

AT*UALL=n to set

• n=0 — No effect (Default)

• n=1 — Accept UDP data from all IP addresses when in a UDP session

*UDPLAST Query or set the option to set S53 to the last accepted IP address through UDP auto

answer. This can be used in conjunction with MD3 so that when there is no UDP session,

new Ethernet host data will cause a connection to be restored to the last IP accepted

through UDP auto answer.

AT*UDPLAST? to query

AT*UDPLAST=n to set

• n=0 — Does not change destination IP (default)

• n=1 — Change destination IP to last received

*USD Query or set the specified delay before sending the UDP packets out the serial port.

AT*USD? to query

AT*USD=n to set

• n=0 — No UDP packet delay (Default)

• n=1 – 255 — Delay in 100ms units, from 100 ms to 25.5 sec.

Table D-10: Serial AT Commands (Continued)

Command Description

1 2 ... 360 361 362 363 364 365 366 367 368 369 370 ... 411 412

Pas de commentaire

Velocity Edge GX440 Guide de l'utilisateur Page 365