Velocity Edge GX440 Guide de l'utilisateur Page 236

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 412
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 235
ALEOS 4.3.4 Software Configuration User Guide
236 4114514
Figure 11-7: ACEmanager: Serial > IO X-Card Serial Port > IO X-Card Serial Configuration
Table 11-6: Serial > IO X-Card Serial Port > IO X-Card Serial Configuration
Field
Description
Startup Mode Default The default startup mode for the serial port
Options are:
Normal (AT command) default
UDP
TCP
You can also use an AT command to configure this field. See MD on page 361.
Configure Serial Port Format: [speed],[data bits][parity][stop bits]
Valid speeds are 300115200, data bits: 7 or 8, parity: O,E,N,M, stop bits: 1,1.5,2
115200, 8N1 (default)
You can also use an AT command to configure this field. See S23 on page 370.
Flow Control Serial port data flow control setting
NoneNo flow control is being used (default)
HardwareRTS/CTS hardware flow control is being used
Transparent SWTransparent software flow control. Uses escaped XON and
XOFF for flow control. XON and XOFF characters in data stream are escaped with
the @ character (0x40). @ in data is sent as @@.
You can also use an AT command to configure this field. See \Q on page 369.
Vue de la page 235
1 2 ... 231 232 233 234 235 236 237 238 239 240 241 ... 411 412

Commentaires sur ces manuels

Pas de commentaire