Velocity Edge MX230 Manuel d'utilisateur télécharger pdf (Page 29)

Install radio on mount bracket with connector cavity

on bottom.

NOTE: Radio must be mounted so the LED (1) on

the bottom of the radio is visible.

Position radio so the LED is as close to mounting

bracket as possible without covering LED. Align hole

on radio with hole on bracket as shown (1).

Install two 5/16 x 5/8 socket head bolts and washers

into mount bracket and radio.

NOTE: Not all bolts provided for radio will be used.

STEP 6

Remove two bolts and washers (1) at rear of cab

roof. Place mount bracket assembly over existing

holes. Re-use existing cab bolts and install bolts onto

bracket. Connector cavities should face the rear of

the cab.

RD04F109

RD04F110

RD04F112

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 45 46

Pas de commentaire

Velocity Edge MX230 Manuel d'utilisateur Page 29