Velocity Edge M40 Spécifications télécharger pdf (Page 5)

TM 05539-IN

WARNING SUMMARY

This warning summary contains general safety warnings and hazardous materials warnings that must be

understood and applied during operation and maintenance of this equipment. Failure to observe these pre-

cautions could result in serious injury or death to personnel.

WARNING

Use only authorized ammunition manufactured to U.S. or North Atlantic Treaty Organization

(NATO) specifications.

WARNING

Always assume every weapon is loaded until it is determined through visual and physical inspection

that it is not. Procedures for clearing/unloading the weapon are outlined in TM 05539-OR_. Failure to

follow this warning may cause injury or death to personnel.

WARNING

The firing pin is under spring tension. Release it slowly to prevent injury to personnel.

WARNING

DO NOT remove or adjust sear engagement screw, overtravel screw or trigger adjustment screw in

trigger housing. The only authorized adjustment is to the fine tune adjustment screw (weight).

WARNING

DO NOT interchange bolt body assemblies from one M40A3/A5 Sniper Rifle to another M40A3/A5

Sniper Rifle. This can cause a malfunction to the weapon. Failure to follow this warning my cause

injury or death to personnel.

WARNING

After unloading the weapon, and with the bolt locked to the rear, visually and physically check the

chamber for ammunition. Failure to follow this warning may cause injury or death to personnel from

negligent discharge.

1 2 3 4 5 6 7 8 9 10 ... 171 172

Pas de commentaire

Velocity Edge M40 Spécifications Page 5